COMPETITION SERIES SHORT NUNBER 4 SECTION

A new short number 4 section with Sun Core finish that will fit all models in the Competition range. As incredible as each of the Competition poles are, by adding this short section substantially stiffens the overall action. The strength of the short number 4 also makes it ideal for applying pressure to hard fighting commercial carp, and for when that extra length is required to net a large fish.

COMPETITION SERIES SHORT POWER KIT

A new shorter power kit, that will fit all models within the Competition range. The shorter power top 2 is ideal for fishing shallow on commercials, where the extra length provided by the standard power kits is unecessary. Featuring Sun Core finish, Magic Steps and a big bore tip. Made up length measures 2.65m.

SUPER LONG NUMBER 1 SECTIONS

Most match kits comprise of a telescopic number 1 and number 2, so it can cost as much as £50 to make up individual kits. Maver’s latest innovation is a long number 1 which incorporates the number 2 section. Ideal for short lining and F1 fishing. This long combo eliminates the need to collapse the telescopic versions for storage and it will fit comfortably inside the pole when packing away or can be housed inside extensions or conventional rod tubes, fits on to the number 3 of a match kit. Manufactured from high modulus carbon and features Sun Core finish, Fusion and Magic Steps.
• B5180 fits all Competition poles (length 175cm, 5ft 6”)
• B5181 fits all Elite poles (length 157cm, 5ft)

MULETTO POWER KIT - EXCLUSIVE TO MAVER

New ready assembled power kit incorporating the patented Muletto bung and nose cone. Each kit is ready elasticated with the popular orange Maver Dual Core 12/20 hollow elastic. The tip of the power kit contains the best internal PTFE bush. The kit is ready to go and can be cut back at the base to fit many poles currently on the market. The Muletto system works brilliantly with hollow elastics in place. You can also purchase the long base universal kit separately.

Assembled kit contains: Muletto bung and wheel, nose cone, extractor rod, internal PTFE bush and 3 metres of 12/20 Maver Dual Core.

BI-CONICAL STEEL EXTENSIONS

High modulus carbon 0.5m butts designed for elbow striking or sitting on. Can also be used to counter balance when fishing at 11.5m or 13m.

The Bi-Conical 1 - Fits Medusa K, K47, H41, Spartacus, Destiny and Satanic.

SUPER TAPER SECTION

All anglers with 9 section Maver poles should get themselves one of these. Fit this high modulus carbon section and change the action of your pole instantly. If you're looking to fish with short lines, either on commercials or across to the far shelf of a canal, you will need this new technology. By fitting the section directly to the No3 of your match kit then onto the male part of the No6, you will stiffen the action of your pole beyond belief. The Super Taper Section will also help you combat strong side winds, and also enhances the rigidity of heavier power kits, eliminating the droop often associated with heavier power kits.

- Fits: Medusa, Messiah, Deliverance 2, Super Powerlite, Medusa Platinum, K47, K31, K27, N27 & N57

- Fits the new Resolution, Ascension, Declaration & Distinction

MAGIC STEPS POWER NUMBER 1 SECTION

This Magic Steps power No1 section will fit the power No2 sections of the following models:
Medusa K, J27, J31, J47, J51

MAVER UNIVERSAL TOP 2 CUPPING KIT WITH CUPS

A superb cupping kit. manufactured from high modulus carbon. Each kit has a long, reinforced base, enabling the angler to cut back to fit most poles. It can be used as a power kit for big elastics or for cupping. The large diameter tip reduces 'bounce' when shipping large amounts of feed. Supplied with two cups, 1 x 100ml and 1 x 250ml, and two metal thread adaptors.

SUPER LONG MATCH TOP

Most match kits comprise a telescopic No1 and No2, so it can cost as much as £50 to make up individual kits. Maver's latest innovation is a long No1 which incorporates the No2 section. This long combo eliminates the need to collapse the telescopic versions for storage and it will fit comfortably inside the pole when packing away or can be housed inside extensions or conventional rod tubes. The base of the section has a long, reinforced collar that can be cut back to fit all makes of pole. The tips are wide bore, which means less cutting back for elastication. Manufactured from high modulus carbon.

- B3355 fits most current models
- B3356 fits most 'J', 'K' & 'M' series poles